Installation
Raised floor installation guidance and links to the original Titanflor installation resources.
Installation
A Well-Planned System.
Use the manufacturer's project-specific instructions and qualified installation personnel; the steps below are high-level orientation only.
STEP 01
Site survey
Verify dimensions, datum level, substrate conditions and finished floor height.
STEP 02
Set out the grid
Mark the panel grid and account for perimeter cuts and service penetrations.
STEP 03
Install pedestals
Position adjustable pedestals to the design level and secure as specified.
STEP 04
Set stringers / panels
Install the matching stringer arrangement if required and place floor panels.
STEP 05
Check finish
Confirm level, alignment, edge treatment and installation against approved drawings.
Stringer System Installation Guide
The original Titanflor site publishes a guide covering layout, levelling and pedestal installation.
Read Original Guide ↗